VR Tuned offers an ECU flash for your Ducati Hyperstrada 821 motorcycle. Our tuning transforms the performance and riding of your bike making it like a whole new vehicle. With our ECU tune, we are improving the full power curve.  With changes to fueling, ignition, and limiters, we create you a full custom tune for your bike.  Besides an increase in horsepower, better throttle response is also one of the most noticeable features.  Our performance ECU calibrators have worked with all types of vehicle ECUs.  Motorcycles are no different and we give you reliable and proven results!

Crank Horsepower Ratings:

• Stock Power: 110HP | 66ft/lbs
• Tuned Power: 116HP | 71ft/lbs

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust or filter will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune bikes worldwide including the USA, South America, Asia, Australian, European, and others no matter the environment, altitude, or octane fuel you run.
• Other custom enhancements are available if requested and applicable.

How to Flash Your ECU?

• Use the DimSport handheld device.  To perform the reading of the ECU it is necessary to use the 3 pins diagnostic plug, to perform the writing of the ECU it is necessary to use the 4 pins diagnostic plug. This means that in order to do the complete tuning you must have 2 different cables. We include the F32GN011 and F32GN048 cables. You can flash between tuned and stock at anytime.  See Instructions Here.
• Bring your bike to our facility where we can use our Master Cable to flash your bike.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your bike and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.

Ducati bikes require the TPS sensor to be reset with a factory DUCATI tool. The bike will not run until this is done.

Fitment:

• 2012-2018 Ducati Hyperstrada 821 with 110hp

For reference, this ECU is a Marelli 7SM.